JDM 2003-2006 TOYOTA HIGHLANDER 3.0L 1MZ-FE VVTi FWD ENGINE ( 1MZ-FE ENGINE )
- Quality inspection & compression tested
- Real photos of the actual item listed
- Expert swap support included free
- Secure checkout — Visa, MC, Shop Pay, PayPal
JDM Toyota Highlander 3.0L 1MZ-FE V6 Engine for Sale
Looking to save your daily driver? The 1MZ-FE engine is the ultimate move. This Toyota Highlander engine is built for smooth cruising and zero drama. If your old motor gave up, this JDM replacement is a total lifesaver. It gets you back on the road fast. No stress, just good vibes. Check fitment below to make sure it matches your ride.
1MZ-FE 3.0L V6 Overview & Specs
The 1MZ-FE is a masterpiece of smooth engineering. It is lightweight, thanks to an all-aluminum build. It uses VVT-i technology for better fuel economy and response. Here are the hard facts:
|
Specification |
Details |
|
Engine Code |
1MZ-FE (VVT-i) |
|
Displacement |
3.0L (2994 cc) |
|
Configuration |
V6, DOHC, 24-Valve |
|
Block Material |
Aluminum |
|
Horsepower |
Approx. 220 HP |
|
Special Feature |
VVT-i (Variable Valve Timing) |
Vehicle Fitment & Compatibility
Getting the right engine code is super key. This VVT-i motor fits several front-wheel drive and all-wheel drive Toyota frames. Always check your VIN first!
Highlander 3.0 / Camry V6 / Sienna / Solara / Avalon
This unit fits the early 2000s Toyota Highlander. It also perfectly matches the Camry V6, Sienna minivan, Solara, and Avalon. It is a super versatile direct fit replacement.
Lexus ES300 & RX300
Need a Lexus ES300 engine? You found it. This motor crosses over to the luxury side. It fits the ES300 and the RX300. Check out our 1MZ-FE for ES300 / RX300 specifically for those builds.
1MZ-FE vs 3MZ-FE
Do not mix these up! The 1MZ is 3.0L. The newer 3MZ-FE is 3.3L. They are not direct swaps for each other without heavy modifications. Stick to your exact displacement.
Condition: Low Mileage & Compression Tested
We only stock super clean JDM engines. This motor has roughly 45k to 65k miles on it. That is barely anything. Plus, it is fully compression tested. We check every cylinder to ensure strong pressure. We want you to have a perfect daily driver. There is zero guesswork here. It is ready to drop in and run.
What’s Included
This package gives you the core components you need. You just swap over your car's original externals.
- Complete aluminum engine block
- Fully assembled cylinder heads
- Intake manifold
- VVT-i solenoids attached
Note: Power steering, alternator, and wiring harness are not covered.
Why Buy This 1MZ-FE from JDM State Motors of NC
We bring the heat with real JDM quality. If you want the cleanest 1mzfe engine, we got you. We never sell junk. Every motor is hand-picked from Japan. We test them, clean them, and ship them fast. You get top-tier support from real car enthusiasts. We want your build to succeed.
Shipping, Warranty & Returns
Freight shipping is quick and painless. We strap the motor to a heavy-duty pallet and ship it straight to your mechanic. We offer a legit 30-day start-up warranty on internal parts. We stand by our products 100%. For all the legal details, read our warranty & shipping page.
Toyota 1MZ-FE Engine FAQs
What vehicles use the Toyota 1MZ-FE engine?
It is used in the Highlander, Camry V6, Sienna, Solara, Avalon, and Lexus ES300/RX300. It was Toyota's main 3.0L V6.
What is the difference between the 1MZ-FE and 3MZ-FE?
The 1MZ is a 3.0L engine. The 3MZ is a 3.3L engine. The electronics and sensors differ, making direct swaps very difficult.
Is the 1MZ-FE reliable?
Yes, highly reliable. Just change the oil regularly to avoid older sludge issues. With VVT-i, it is smooth and very efficient.
Will a Highlander 1MZ fit a Camry V6, Sienna, or Lexus?
Usually, yes. The core block is the same. You may just need to reuse your original intake or oil pan for exact clearance.
How many miles does this imported 1MZ-FE have?
It typically has around 45,000 to 65,000 miles. JDM engines are removed early due to strict vehicle inspections in Japan.
Is it compression-tested, and what’s included?
Yes! We test every unit. You receive the complete long block assembly, ready for your external accessories.
What’s the warranty and shipping time?
You get a standard 30-day internal warranty. Freight shipping usually takes 3 to 7 business days depending on location.
How do I confirm the 3.0L fits my exact year and model?
Check the emissions sticker under your hood. You can also confirm fitment with our team right now!
Add to Cart / Talk to a Specialist
Looking for more Toyota V6 engines? We have them. Hit Call Us Now if you need fast help!
| Part Code | N/A |
| Engine Model | Contact us for details |
| Displacement | N/A |
| Cylinder Config | N/A |
| Fuel System | Gasoline / EFI |
| Transmission | N/A |
| Mileage | 45,000 – 55,000 Miles |
| Origin | Japan |
| Warranty | 90 Days Limited Parts Warranty |
| Condition | Used — JDM Low-Mileage Import |
| Testing | Compression Tested, Visually Inspected |
Freight Delivery
All engines are crated and palletized by our team. We use trusted freight carriers with real-time tracking to all 48 contiguous states.
Delivery Timeline
Processing: 1–2 Business Days
Transit: 2–7 Business Days
You will receive a tracking number via email once shipped.
Coverage Area
We ship to all lower 48 US states. Alaska, Hawaii, Puerto Rico, and international shipping available — contact us for a custom quote.
Secure Packaging
Every engine is strapped to a reinforced pallet with protective wrapping to ensure zero movement and damage during transit.
Need a faster delivery? Contact our team and we'll check expedited freight availability for your location.
All JDM engines sold by us come with a 90-Day Limited Warranty covering manufacturer defects and internal mechanical failures discovered during normal operation.
What's Covered:
- Internal engine components (pistons, crankshaft, camshaft, bearings)
- Oil pump and water pump (if supplied with the engine)
- Block and head integrity
What's Not Covered:
- Damage due to improper installation
- Overheating caused by external cooling system failure
- Normal wear items (gaskets, seals, belts)
- Labor costs for removal or reinstallation
To make a warranty claim, contact our support team with your order number and a description of the issue. We may request photos or a compression test report.