Store Disclaimer
Complete transparency about our products, their condition, their limitations, and your responsibilities as a buyer of used Japanese domestic market automotive parts.
Important — Read Before Purchasing
Why This Disclaimer Exists
JDM State Motors of NC LLC operates jdmmotorsnc.com, an online retail store specializing in used Japanese domestic market (JDM) automotive engines, transmissions, suspension components, and related drivetrain parts. All products sold through our store are sourced directly from Japan and are used components that have been removed from vehicles previously operated on Japanese roads.
Because of the nature of our products — used mechanical parts with prior service history, imported from another country, intended for installation into vehicles built and registered in the United States — it is essential that every customer reads and understands this disclaimer before placing an order. This document explains the exact condition of our parts, what we warrant and what we do not, how compatibility works, what mileage disclosures mean, and what legal responsibilities you accept when purchasing from our store.
This disclaimer is part of our complete legal framework alongside our Terms of Service, Refund Policy, Privacy Policy, and Legal Notice. Together these documents govern every transaction made on jdmmotorsnc.com. If you have any questions before purchasing, please contact us through the form at the bottom of this page or call +1 (919) 803-0095 during business hours.
Key Facts About Every Product We Sell
- › All parts are used, pre-owned automotive components with prior service history unless the individual product listing explicitly states otherwise.
- › All parts are sourced directly from Japan and were originally manufactured for vehicles sold in the Japanese domestic market, which may differ from US-market vehicles in specifications, emissions output, and design.
- › JDM State Motors of NC does not manufacture, modify, or remanufacture any parts we sell. We act as a specialty retailer of used OEM components.
- › Parts are sold as-is unless a specific written warranty is explicitly stated within the individual product listing on jdmmotorsnc.com.
- › Parts are not tested, dyno-run, or leak-checked by our team unless the product listing specifically states that a part has been tested and includes the result.
- › We ship to US addresses only. All products must comply with applicable federal and state regulations in the state where they will be installed and used.
Section 1 — Product Condition
Used Parts Condition & Grading
Every engine, transmission, and mechanical component listed on jdmmotorsnc.com is a used part that was previously installed and operated in a vehicle. These parts are removed from Japanese vehicles and imported to the United States through established JDM import channels. They arrive in used condition. The following table explains exactly what buyers can expect based on our product categories.
| Part Category | Expected Condition | External Wear | Internal Assessment | Buyer Action Required |
|---|---|---|---|---|
| JDM Engines (Complete) | Used — pulled from running Japanese vehicle Used Condition |
Typical surface rust on external components, minor oil seepage normal for used engines, hoses and sensors may show age | Internal condition reflects documented mileage; not torn down or inspected internally unless listing states otherwise | Professional installation required; pre-installation inspection by a qualified mechanic recommended |
| Transmissions | Used — removed from donor vehicle Used Condition |
Grime, surface corrosion, and seal weeping are common and expected | Shift function not tested post-removal unless explicitly stated in listing | Verify fluid condition and seal integrity before installation; professional inspection strongly advised |
| Suspension & Steering | Used — condition varies by donor Inspect Before Install |
Bushings, boots, and ball joints may show wear consistent with mileage | Strut inserts, spring rates, and alignment components not measured unless stated | Inspect all rubber components for cracking; replace wear items as part of installation |
| Differentials & Transfer Cases | Used — pulled complete Used Condition |
External oil seepage and surface corrosion expected | Gear backlash and clutch pack condition not individually measured unless stated | Drain and inspect fluid; replace seals as best practice before installation |
| Electrical & ECU | Used — pulled with vehicle Buyer Verifies Fit |
Connector pins may show oxidation; harness condition varies | ECU and electrical components are not bench-tested unless listing explicitly states | Confirm exact part number compatibility before purchase; electrical refunds are limited per Refund Policy |
What "Used" Means in the Context of JDM Parts
In the used automotive parts industry, "used" means the component was installed and functional in a vehicle prior to removal. It does not mean the part is damaged, failed, or non-functional. The vast majority of JDM engines and transmissions we sell came from low-mileage Japanese vehicles and are in serviceable, functional condition at the time of removal. However, because these are used mechanical parts, JDM State Motors of NC cannot guarantee that every part will operate indefinitely or perform identically to a new or remanufactured component. Buyers should treat every used JDM part as they would any quality used component — inspect it upon arrival, have it evaluated by a qualified mechanic, and address any wear items during the installation process.
Section 2 — Warranty
Warranty Limitations & As-Is Disclosure
Unless a specific, written warranty is explicitly stated within the product listing for a particular item on jdmmotorsnc.com, all products are sold as-is. This means JDM State Motors of NC makes no express warranty and no implied warranty — including no implied warranty of merchantability and no implied warranty of fitness for a particular purpose — beyond what is explicitly stated in a specific product listing.
This as-is disclosure is consistent with the Uniform Commercial Code (UCC), which governs the sale of goods in the United States and permits sellers to disclaim implied warranties through a clear and conspicuous written statement. This disclaimer constitutes that statement for all transactions on jdmmotorsnc.com, and by completing a purchase you acknowledge having read it.
Listing Accuracy
We warrant that product descriptions, mileage figures (where documented), and compatibility information listed in each product page on jdmmotorsnc.com are accurate to the best of our knowledge and based on available import documentation at the time of listing. If a listing contains a material error, please contact us immediately before installation.
Post-Install Performance
We do not warrant that any part will perform to a specific standard after installation, that it will last a specific period of time, or that it will function identically to a new OEM component. Used parts have variable remaining service life based on their specific history, installation quality, operating conditions, and maintenance.
Improper Installation
Any warranty explicitly stated in a product listing is immediately void if the part is installed by an unqualified individual without the proper tools, torque specifications, and procedures; if the part is modified after purchase; if it is used in an application for which it was not designed; or if it is damaged due to improper installation, oil starvation, overheating, or improper break-in procedures.
No Labor Coverage
JDM State Motors of NC is not responsible for any labor costs, towing costs, rental vehicle costs, lost wages, or any other consequential damages or incidental expenses that arise from the purchase, installation, use, failure, or return of any product purchased from our store. Our maximum liability is limited to the purchase price of the part itself.
Explicit Listings Only
If a product listing on jdmmotorsnc.com includes specific warranty language — such as a 30-day or 90-day warranty — that warranty applies only to the specific part listed and only under the conditions stated in that listing. It does not extend to any other parts you may have purchased simultaneously or to related components affected during installation.
How to Make a Claim
If you believe a part you received does not match its listing description, contact us within the window specified in our Refund Policy before any installation occurs. Once a part has been installed, our ability to evaluate its condition is significantly limited and return eligibility may be affected. Review our full Refund Policy for complete terms.
Section 3 — Fitment
Vehicle Compatibility & Fitment Responsibility
JDM parts are originally manufactured for Japanese domestic market vehicles, which often share mechanical platforms with US-market vehicles but are not always identical in every specification. This is a fundamental characteristic of JDM parts purchasing, and it is the buyer's responsibility to confirm compatibility before placing an order.
Compatibility information provided in our product listings — including vehicle year, make, model, engine code, and trim level — is provided as a general guide based on manufacturer specifications and JDM import documentation. This information represents the vehicle from which the part was removed or the general application for which that engine or transmission is known to fit. It does not account for every regional variation, mid-cycle refresh, special edition trim, or optional equipment configuration that your specific vehicle may have.
Your Responsibility to Verify
- › Confirm the engine or transmission code matches your vehicle's factory spec sheet — not just the model name or year.
- › Confirm your vehicle's transmission type (automatic, manual, AWD, FWD) matches the unit being purchased.
- › Verify that any accessory drives, sensors, or mounting points will be compatible with your US-market vehicle and engine bay.
- › Consult a qualified mechanic who has experience with JDM engine swaps before placing your order if you are not certain.
- › Review the specific product listing carefully and contact us with any compatibility questions before purchase — not after.
Common JDM Compatibility Differences
- › JDM engines may produce different power output, compression ratios, or use different fuel octane requirements compared to their US-market counterparts.
- › Sensor connectors, O2 sensor ports, and emissions-related fittings may differ between JDM and USDM versions.
- › Transmission gear ratios on JDM units may differ from US-market gear ratios, affecting speedometer accuracy and final drive behavior.
- › Accessory brackets, power steering pump orientation, and A/C compressor mounts may not match US-spec vehicles directly.
- › Computer (ECU) programming may differ; JDM ECUs may require reprogramming, replacement, or use of a compatible US-spec ECU for full functionality.
Orders Placed for the Wrong Vehicle — Our Policy
JDM State Motors of NC is not responsible for the purchase of parts that are incompatible with your vehicle if the incompatibility results from the buyer's failure to verify fitment before ordering. Compatibility-related returns are subject to our Refund Policy and Cancellation Policy. If you have any doubt about compatibility, please contact us at jdmstatemotorsofnc@gmail.com or call +1 (919) 803-0095 before completing your purchase.
Section 4 — Mileage
Mileage Disclosure & Documentation
One of the primary appeals of JDM parts is their typically low mileage compared to US-market used parts of the same age. Japan has strict vehicle inspection laws (the "Shaken" system) that incentivize vehicle owners to sell or scrap vehicles well before they accumulate the mileage common in the US. As a result, many JDM engines and transmissions are available with genuine low mileage figures that make them attractive replacements for high-mileage US-market vehicles.
However, JDM State Motors of NC is not the original owner of these vehicles and cannot independently verify every mileage figure provided through the import and auction documentation system used in Japan. The following disclosures apply to all mileage representations made on our product listings.
Documented Mileage
- › Where a product listing states a specific mileage figure — such as "60,000 km" — that figure is sourced from Japanese auction or dismantler documentation.
- › Japanese vehicles record mileage in kilometers (km). We display mileage in km and/or miles on our listings. 1 km = 0.621 miles.
- › Documented mileage reflects the odometer reading at the time of vehicle auction or disassembly in Japan, as recorded by the source facility.
- › JDM State Motors of NC passes this documentation through in good faith but cannot independently certify its accuracy beyond what the documentation states.
Undocumented Mileage
- › Some product listings may state "mileage unknown" or "undocumented." This means no verifiable mileage documentation was provided by the source in Japan.
- › In these cases, JDM State Motors of NC makes no representation about the actual mileage of the part and buyers should treat the part as a standard used component of unknown age.
- › Pricing for undocumented-mileage units reflects the uncertainty in their history. We do not inflate claims about undocumented units.
- › Undocumented mileage is disclosed clearly in each affected listing; if you have concerns, contact us before purchasing.
Federal Odometer Disclosure — 49 U.S.C. § 32701 et seq.
The Federal Odometer Act (49 U.S.C. § 32701 et seq.) prohibits odometer fraud in the sale of motor vehicles. JDM State Motors of NC sells individual automotive parts, not complete vehicles, and therefore the Federal Odometer Act does not apply to our parts transactions in the same way it applies to vehicle sales. However, we are committed to the spirit of this law — we do not misrepresent mileage, we disclose when mileage is undocumented, and we pass through all available documentation from the source facility in Japan. Any mileage figure we provide is given in good faith based on the documentation available to us.
Section 5 — Trademarks & Brand Names
OEM Brand & Trademark Disclaimer
JDM State Motors of NC LLC is an independent used automotive parts dealer. We are not an authorized dealer, affiliate, partner, or licensee of any original equipment manufacturer (OEM), automotive brand, or vehicle manufacturer. The brand names, vehicle model names, engine codes, and manufacturer names referenced on jdmmotorsnc.com are used solely for the purpose of accurately describing part compatibility and identifying the vehicles from which parts were removed.
All trademarks, registered trademarks, service marks, brand names, model names, and logos referenced on our website remain the exclusive property of their respective owners. Reference to these names on jdmmotorsnc.com does not imply any affiliation with, endorsement by, authorization from, or sponsorship by those manufacturers.
What "OEM" Means for Our Products
When we refer to parts as "OEM" or "original equipment," we mean that the part was manufactured by or for the original vehicle manufacturer and installed in the vehicle at the factory — not that it is being sold by or through an authorized dealer network. Our parts are genuine factory components pulled from donor vehicles in Japan. They are authentic OEM parts in the sense of being original, unmodified manufacturer components — but they are sold through our independent dealership, not through an authorized manufacturer distribution channel.
Section 6 — Liability
Limitation of Liability
To the fullest extent permitted by applicable US federal and state law, JDM State Motors of NC LLC's total liability to any buyer for any claim arising from the purchase, delivery, possession, installation, or use of any product purchased through jdmmotorsnc.com shall not exceed the original purchase price paid by the buyer for that specific product.
JDM State Motors of NC LLC shall not be liable — under any theory of law including contract, tort, strict liability, negligence, or warranty — for any of the following categories of damages, even if we have been advised of the possibility of such damages.
Losses that result as a consequence of the failure of a part, including damage to other vehicle components, systems, or fluids caused by a failed or incompatible part after installation.
Out-of-pocket costs incurred in connection with a part purchase or failure, including diagnostic fees, towing costs, shop labor charges, rental vehicle fees, or storage fees.
Losses that do not flow directly from the part itself, such as business losses, lost contracts, missed appointments, or reputational harm resulting from vehicle downtime.
Any commercial or personal income lost because a vehicle was out of service, a project was delayed, or a business use vehicle was unavailable as a result of a part purchase or installation issue.
Enhanced or exemplary damages of any kind. Our liability is strictly limited to the refund or replacement value of the specific part purchased, not to any punitive amount beyond that value.
State Law Notice — Some States Limit Liability Disclaimers
Some US states, including New Jersey, Massachusetts, and certain others, do not allow the exclusion or limitation of incidental or consequential damages in consumer contracts. If you are a resident of a state that imposes such restrictions, the limitations above may not apply to you in full. In those cases, our liability is limited to the maximum extent permitted by the law of your state. This does not affect any statutory consumer protection rights you may have under applicable state law.
Section 7 — Legal Compliance
Emissions, Legal Use & Regulatory Compliance
JDM engines, transmissions, and related drivetrain components are imported from Japan and were originally manufactured to comply with Japanese domestic emissions standards and vehicle regulations. Japanese emissions standards differ from those enforced in the United States by the Environmental Protection Agency (EPA) under the Clean Air Act and, in California, by the California Air Resources Board (CARB) under California Health & Safety Code Section 43000 et seq.
It is the sole responsibility of the buyer to determine whether a JDM part complies with the emissions and equipment regulations in the state where the vehicle will be registered and operated, and to obtain any required approvals or exemptions before installation. JDM State Motors of NC makes no representation that any part sold on jdmmotorsnc.com is compliant with US federal or any individual state's emissions regulations unless explicitly stated otherwise in the product listing.
EPA Clean Air Act
The US Clean Air Act (42 U.S.C. § 7401 et seq.) prohibits the installation of any engine or component that renders a motor vehicle non-compliant with federal emissions standards for vehicles registered on US public roads. Buyers are responsible for confirming that any JDM engine swap does not cause their vehicle to fail applicable federal emissions testing requirements.
CARB Regulations
California enforces the most stringent vehicle emissions standards in the US under CARB. Most JDM engine swaps are not CARB-compliant and cannot be legally installed in vehicles registered in California for street use without an EO (Executive Order) exemption. California buyers must verify CARB compliance independently before purchasing. JDM State Motors of NC cannot advise on CARB compliance for specific installations.
State Inspection Laws
Many US states conduct vehicle safety and emissions inspections. A JDM engine swap may cause a vehicle to fail a state inspection if the replacement engine does not match the original engine code on the vehicle's title or does not meet state emissions output requirements. Buyers in all states that conduct vehicle inspections should verify compatibility with state inspection procedures before purchase and installation.
Competition & Track Use
JDM engines and components are commonly used in competition, track-day, off-road, and race applications where on-road emissions regulations do not apply. For purely off-road or competition vehicles that will never be registered for public road use, emissions compliance is the responsibility of the buyer to verify under the rules of the relevant sanctioning body or event organizer.
Section 8 — State Laws
State-Specific Consumer Laws & Disclosures
Because JDM State Motors of NC ships products to all 50 US states, our customers are subject to a variety of state consumer protection, lemon law, implied warranty, and used parts regulations. The following disclosures address state-specific provisions that may affect your rights as a buyer.
CA — Key Provisions
- › California's Song-Beverly Consumer Warranty Act provides implied warranty protections for new goods. Because all JDM State Motors of NC products are used parts sold as-is, the implied warranty of merchantability under Song-Beverly does not apply to our transactions.
- › California's CARB regulations prohibit the installation of non-compliant engines in on-road vehicles. Buyers are solely responsible for compliance.
- › California Proposition 65 applies to some automotive parts. We do not manufacture parts; buyers should review any available product documentation for California Prop 65 warnings.
TX — Key Provisions
- › The Texas Deceptive Trade Practices-Consumer Protection Act (DTPA) prohibits false representations about goods. JDM State Motors of NC does not make false representations; all condition disclosures are made in good faith.
- › Texas requires vehicles undergoing significant engine replacement to pass the state emissions inspection program (I/M program) if the vehicle was previously subject to emissions testing. Buyers must verify whether their specific vehicle falls under these requirements.
- › Texas law allows parties to limit remedies in commercial transactions. Our liability limitation clauses are enforceable under Texas law to the extent permitted.
FL — Key Provisions
- › Florida's Unfair and Deceptive Trade Practices Act (FDUTPA) prohibits unfair or deceptive acts in commerce. Our product descriptions are accurate to the best of our knowledge and contain all material condition disclosures.
- › Florida has county-level vehicle emissions testing in select counties. Buyers installing JDM engines into vehicles registered in these counties must verify that the replacement engine will pass applicable testing.
- › Florida's used motor vehicle parts dealers are regulated under Florida Statute § 319.30. We are an online retailer of used parts sold across state lines; Florida buyers should be aware of these regulations for locally sourced parts.
NY — Key Provisions
- › New York General Business Law § 349 prohibits deceptive acts or practices in the conduct of business. Our listings are accurate and we do not engage in deceptive pricing or condition misrepresentation.
- › New York operates one of the strictest vehicle inspection programs in the country, which includes both safety and OBD/emissions testing. JDM engine swaps must not cause a vehicle to fail NY inspection. Buyers are responsible for verifying compliance.
- › New York adopted California's CARB emissions standards for certain vehicle years. Additional restrictions may apply to newer vehicles registered in New York.
NC — Our Home State
- › JDM State Motors of NC LLC is registered in North Carolina (EIN 93-4377095). Our business is located at 1334 Bobbitt Dr., Garner, NC 27529.
- › North Carolina's Unfair and Deceptive Trade Practices Act (NCUDTPA), N.C. Gen. Stat. § 75-1 et seq., governs our commercial conduct. We are compliant with all applicable NC consumer protection statutes.
- › NC requires vehicle safety and emissions inspections in most counties. Vehicles with JDM engine swaps must pass NC inspection for lawful road operation. Buyers are responsible for confirming compliance.
- › This disclaimer is governed by and shall be construed in accordance with the laws of the State of North Carolina, without regard to its conflict of law provisions.
WA — Key Provisions
- › Washington's Consumer Protection Act (CPA), RCW 19.86, prohibits unfair or deceptive practices in trade or commerce. JDM State Motors of NC fully complies with this standard.
- › Washington adopted California CARB standards for newer vehicles. Washington buyers installing JDM engines should verify emissions compliance before purchase.
- › Washington's strong consumer protection laws include a private right of action for UDAP violations; we are committed to accurate and honest product descriptions at all times.
VA — Key Provisions
- › Virginia's Consumer Protection Act (VCPA), Va. Code § 59.1-196 et seq., prohibits misrepresentation of goods. Our listings are factual and condition-accurate to the best of our knowledge.
- › Virginia performs annual vehicle safety and emissions inspections. JDM engine swaps must pass Virginia inspection; buyers must verify that any engine replacement meets Virginia inspection requirements.
- › Virginia is a neighboring state to North Carolina, and many Virginia customers ship to the same region. Standard NC law governs our contracts unless superseded by applicable Virginia consumer protection statutes.
GA — Key Provisions
- › Georgia's Fair Business Practices Act (FBPA), O.C.G.A. § 10-1-390 et seq., protects consumers from unfair or deceptive acts. We comply with the standards of the FBPA.
- › Metro Atlanta counties require OBD emissions testing. JDM engine swaps may affect OBD readiness; buyers in affected GA counties should verify that the replacement engine will pass GA OBD testing before purchase and installation.
- › Georgia's Uniform Commercial Code governs the sale of goods and permits clear, conspicuous as-is disclaimers. This disclaimer constitutes such notice for all GA transactions on jdmmotorsnc.com.
All Other States — Governing Principles
For all other US states not individually addressed above: this disclaimer, our Terms of Service, and all transactions on jdmmotorsnc.com are governed by the laws of the State of North Carolina. The Uniform Commercial Code applies to all sales of goods. If any provision of this disclaimer conflicts with a mandatory consumer protection law in your state, that provision shall be modified only to the extent required to bring it into compliance with that law, and all remaining provisions shall continue in full force. You are responsible for understanding and complying with all laws in your state governing vehicle modification, emissions, and parts installation.
Section 9 — Buyer Responsibility
What You Are Responsible for as a Buyer
Purchasing a JDM part from jdmmotorsnc.com is a commitment that comes with specific responsibilities on the buyer's side. The following outlines clearly what we expect of all buyers and what you accept when you place an order with JDM State Motors of NC.
Confirm that the part you are purchasing is compatible with your specific vehicle, engine code, and transmission type before placing an order. Contact us at jdmstatemotorsofnc@gmail.com if you need assistance.
Read the entire product listing, including all condition notes, mileage disclosures, and compatibility qualifications, before purchasing. Purchasing constitutes acceptance of the listing's stated condition.
All JDM engine, transmission, and drivetrain installations should be performed by a qualified automotive technician familiar with JDM parts. Improper installation voids any stated warranty and may result in property damage or injury.
Before installing any JDM part in a vehicle that will be operated on public roads, verify that the installation complies with your state's emissions, inspection, and registration laws. You are solely responsible for this determination.
Inspect all parts promptly upon delivery and before any installation begins. Report any damage, missing components, or discrepancies from the listing description to us within the timeframe specified in our Refund Policy.
Additional Disclosures
Other Applicable Disclaimers
Website Information Accuracy
- › Product information, pricing, mileage figures, and compatibility data on jdmmotorsnc.com is updated regularly but may occasionally contain errors.
- › If we discover a pricing or description error after your order has been placed, we will contact you to inform you of the correct information before processing or shipping.
- › Photos shown in product listings represent the typical condition of the listed part or the actual part being sold. Minor cosmetic variations may exist.
- › We reserve the right to correct errors in product listings at any time without prior notice. Changes do not affect orders already completed and shipped.
Shipping & Delivery Disclaimer
- › We ship to US addresses only through our standard carrier network. See our Shipping Policy for full details.
- › Freight damage must be reported to the carrier and to us immediately upon delivery. Inspect all shipments before signing for delivery where possible.
- › Delivery timeframes are estimates only. JDM State Motors of NC is not liable for carrier delays, weather-related shipping disruptions, or delays caused by customs or port congestion.
- › Track your order at any time using our Order Tracking Page. For shipping inquiries, contact us at jdmstatemotorsofnc@gmail.com.
Payment & Pricing Disclaimer
- › All prices on jdmmotorsnc.com are listed in US Dollars (USD). See our Payment Policy for accepted payment methods.
- › Sales tax is collected where required by applicable state law. The applicable tax rate is calculated at checkout based on your shipping address.
- › Prices are subject to change at any time without prior notice. The price displayed at the time you complete checkout is the price at which your order is accepted.
- › JDM State Motors of NC does not engage in price gouging, bait-and-switch pricing, or any other deceptive pricing practices prohibited by applicable federal or state law.
Safety Disclaimer
- › Automotive parts, particularly engines and drivetrains, are heavy mechanical components. Improper handling can result in serious injury. Always use appropriate lifting equipment and personal protective equipment when receiving and handling large parts.
- › Engine fluids including oil, coolant, and transmission fluid may remain in or on parts as shipped. Handle with appropriate care and dispose of all fluids in accordance with applicable EPA and state environmental regulations.
- › JDM State Motors of NC is not responsible for injury or property damage resulting from the improper handling, storage, or installation of any part purchased from our store.
- › If you have a safety concern about a product you received, contact us immediately at +1 (919) 803-0095 before proceeding.
Changes to This Disclaimer
JDM State Motors of NC reserves the right to update, modify, or replace this disclaimer at any time. Updates will be reflected by a revised effective date at the top of this page. Your continued use of jdmmotorsnc.com following the posting of a revised disclaimer constitutes your acceptance of those changes. We recommend reviewing this page periodically, especially before placing a new order. For questions about any change to this disclaimer, contact us at jdmstatemotorsofnc@gmail.com.
Disclaimer Inquiries
Have a Question Before You Buy?
If you have a question about our product condition, a specific part's compatibility with your vehicle, the mileage documentation on a listing, or any of the terms in this disclaimer, please reach out before placing your order. We are here to help you make a confident, informed purchase decision.
By submitting this form, you consent to JDM State Motors of NC contacting you at the email address or phone number provided, solely to respond to your inquiry. We do not add inquiry form submissions to marketing lists. View our Privacy Policy for details on how your information is handled.
Reach Our Team
Contact & Location
JDM State Motors of NC LLC
1334 Bobbitt Dr., Garner, NC 27529
EIN: 93-4377095 · Registered in North Carolina
Contact Page →
Governing Law & Final Disclosures
This disclaimer and all transactions on jdmmotorsnc.com are governed by the laws of the State of North Carolina, without regard to its conflict of law principles. Any dispute arising from a purchase made on jdmmotorsnc.com that cannot be resolved directly with our customer service team shall be subject to the exclusive jurisdiction of the courts of Wake County, North Carolina, or the applicable federal courts for the Eastern District of North Carolina.
All products sold by JDM State Motors of NC LLC are used automotive components in used condition unless explicitly stated otherwise in the individual product listing. Parts are imported from Japan and sold as-is under the terms of this disclaimer. No implied warranty of fitness for a particular purpose applies beyond what is expressly stated in the applicable listing or our stated warranty terms.
JDM State Motors of NC LLC is not affiliated with, endorsed by, or authorized by any OEM including Honda, Acura, Toyota, Lexus, Nissan, Infiniti, Subaru, Mazda, or Mitsubishi. All brand names referenced on this website are used solely to indicate part compatibility. Buyers are solely responsible for confirming that any part purchased is compatible with their vehicle and compliant with all applicable federal, state, and local laws prior to installation.
This business is registered as JDM State Motors of NC LLC in the State of North Carolina, EIN 93-4377095. For complete legal terms, refer to our Legal Notice, Terms of Service, and Privacy Policy.